Klark Teknik DN100 Active DI Box

Original price was: R2,999.00.Current price is: R1,999.00. - Free Shipping Within SA ! !


The DN100 has become an established favourite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN100 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN100 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 kΩ load. This increased headroom means that much higher level input signals can be accommodated without the need for an attenuating pad. Combined with a very low noise input circuit topology, DN100 offers a very wide dynamic range, and only requires a single -30 dB pad for use when connecting directly to instrument amplifier outputs.

DN100 is built to handle the rigours of life on the road, a thick aluminium extrusion protects the electronics, and in turn is covered by a tough silicone rubber sleeve.


Key Features

Active DI box with highheadroom design and +48 V phantom power for extended dynamic range
Fully transformer-isolated design ensures electrical separation between PA and stage equipment
Balanced line input on Neutrik* XLR and high impedance input and link output on 1/4″ TRS connectors
20 dB input pad and earth lift switches
Aluminium extrusion casing with protective rubber corners
Compact and rugged design

Add to Wishlist
Add to Wishlist



Connectors : 2 x 1/4″ TRS and 3-pin XLR linked in parallel
Impedance : 1 MΩ nominal, balanced or unbalanced, 20 kΩ (XLR only)
Max input level : 35 dBu (with pad enabled)
Attenuator : 20 dB pad

Connector :3-pin XLR
Impedance : 50 Ω
Max output level : 15 dBu with 10 kΩ load
Min load : 600 Ω

Noise : -103 dBu, 22 Hz to 22 kHz unweighted, with input terminated by 10 kΩ resistor
Frequency response : 20 Hz to 20 kHz, ±1 dB, 10 kΩ load
Distortion (THD + N) : Typically <0.005% @ 1 kHz, +10 dBu

Power Requirement
Voltage : +48 V phantom
Current consumption : <10 mA

Dimensions : 118 x 63 x 112 mm (4.7 x 2.5 x 4.4″)
Weight : (4.7 x 2.5 x 4.4″) Weight 0